How To Measure Lawn Mower Belt: A Step-by-Step Guide
When it comes to lawn care, a well-maintained lawn mower is essential. One of the most important components of a lawn mower is the belt, which transmits power from the engine to the blades. A worn or damaged belt can cause the mower to run poorly or even stop working altogether. That’s why it’s important to know how to measure a lawn mower belt so you can replace it when necessary.
Measuring a lawn mower belt is a simple process that can be done in a few minutes.
How To Measure Lawn Mower Belt: A Step-by-Step Guide
Step 1: Find the belt tensioner.
The belt tensioner is a spring-loaded pulley that keeps the belt tight. It is typically located on the side of the mower deck.
Step 2: Loosen the belt tensioner.
To loosen the belt tensioner, locate the adjustment bolt or lever and turn it counterclockwise. This will release the tension on the belt.
Step 3: Remove the belt.
Once the belt is loose, you can remove it from the mower deck. To do this, simply lift the belt off the pulleys.
Step 4: Measure the belt.
To measure the belt, use a tape measure to measure the length of the inside circumference. This is the measurement you will need to use when purchasing a replacement belt.
Step 5: Install the new belt.
Once you have a new belt, you can install it on the mower deck. To do this, simply reverse the steps you used to remove the old belt.
Step 6: Tighten the belt tensioner.
Once the new belt is installed, tighten the belt tensioner. To do this, turn the adjustment bolt or lever clockwise until the belt is tight.
